b'Standard EN 407 - Heat ProtectionEN STANDARDS IN DETAIL PPE - HAND PROTECTIONRelevant Australian Standard: AS/NZS 2161.4:1999This standard specifies thermal performance for protective gloves against heat and/or fire.Performance Levels 1 2 3 4A. Burning Behaviour 20 secs 10 secs 3 secs 2 secs (after flame and after glow time) no requirement 120 secs 25 secs 5 secsB. Contact Heat100C250C350C500C (contact temperature and threshold time) 15 secs 15 secs 15 secs 15 secsEN407 C. Convective Heat 4 secs 7 secs 10 secs 18 secs(heat transfer delay)ABCDEF D. Radiant Heat 7 secs 20 secs 50 secs 95 secs(heat transfer delay)E. Small Drops Molten Metal (number of drops) 10 15 25 35F. Large Quantity Molten Metal30g 60g 120g 200g(mass)Standard EN511 - Cold ProtectionRelevant Australian Standard: AS/NZS 2161.5:1998This standard applies to any gloves to protect the hands against convective and contact cold down to -50 C.Performance Levels 0 1 2 3 4EN511 A. Convective Cold| 0.10 0.10 | 0.15 0.15 | 0.22 0.22 | 0.30 0.30 |Thermal insulation ITR in m2. C/WB. Contact ColdR 0.025 0.025 R 0.050 0.050 R 0.100 0.100 R 0.150 0.150 RABC Thermal resistance R in m2. C/WC. Water Penetration Test Fail Pass - - -Standard EN421 - Radioactive Contamination & Ionising RadiationRelevant Australian Standard: AS/NZS 2161.8:2002This standard applies to any gloves that protect the hands against radioactive contamination & ionising radiation.EN421 EN421Gloves protecting from direct contact with radioactiveGloves protecting from direct contact with radiations substances. (X-ray, alpha-, beta-, gamma- or neutron radiations).Standard 60903 - Electrical Insulating GlovesThis standard applies to any gloves that protect the hands against electrical voltage.Gloves protecting from electrical voltage.Material Courtesy of AnsellCLICK&COLLECT144 CALL132 100OR SHOP24/7ATRSEA.COM.AU FREE Pick-up from our Stores'